Time (According To Models); Setting Procedure - Tecnik HB1TI2T0 User Manual

The cooking time has
elapsed
Note
Time
(according to models)

Setting procedure

Example: 13:00
6.
Use the + button to set a later end time.
The setting is adopted after a few seconds. The
display will show the end time until the oven switches
on.
A signal sounds. The oven switches off.
Press the j button twice and switch off the function
selector.
You can change the setting while the symbol is
flashing. The setting has been adopted if the symbol
lights up permanently. You may change the waiting
time that elapses before the setting is adopted. See
the Basic settings section for more details.
When the oven is first connected, or following a power
cut, the j symbol and three zeros flash in the display.
Set the time.
The function selector must be switched off.
1.
Press the j clock button.
12.00 appears in the display and the j symbol
flashes.
17