Changing The Basic Settings - Tecnik HB1TI2T0 User Manual

Changing the basic
settings
Example: Hiding the time
You do not wish to change
all the basic settings
Correcting settings
There must be no program set.
1.
Press the j clock button and the + button at the
same time until a 1 appears in the display. This is
the basic setting for the time in the foreground.
2.
Change the basic setting using the + or - button.
3.
Confirm with the j clock button.
A 2 will appear in the display for the basic setting for
the signal duration.
Change the basic setting as described in step 2 and
confirm with the j clock button. You can now change
the reset time. To finish press the j clock button.
If you do not wish to change a basic setting,
press the j clock button. The next basic setting will
appear.
You may change your settings again at any time.
21