Pwb-Main Removal - Mitsubishi Electric WD-60735 Service Manual

MODELS: WD-60735 / WD-60C8 / WD-65735 / WD-65736 / WD-65835 / WD-65C8 / WD-73735 /

PWB-MAIN Removal

1) Disconnect all cables to PWB-MAIN
2) Remove two screws (D).
3) Remove screws (E).
4) Carefully lift the PWB-MAIN from the chassis
box.
PWB-MAIN Installation
1) Install two screws (D) first
2) Then install screws (E).
3) Transfer Index Data from Engine
(refer to page 32)
4) Restore Alignment and White Balance Settings.
5) Restore Keystone Geometry from Backup.
WD-73736 / WD-73835 / WD-73C8
Page 10