MODELS: WD-60735 / WD-60C8 / WD-65735 / WD-65736 / WD-65835 / WD-65C8 / WD-73735 /
Symptoms
• Noise - Bad Motor Bearing
• Solarized Picture - Before replacing the Color Wheel, try adjusting the IDL (Index Delay), refer to page 27
for the alignment procedure.
Replacement Procedure
CAUTION: This procedure should be done in a dust free environment. Any dust entering into the color
1) Remove Engine assembly from the back of the unit.
2) Cover the projection lens to protect it from scratches and remove the TOP DUCT
3) Remove the 2 screws (A) as shown in picture CW1
4) Disconnect the 2 connectors (B) as shown in picture CW1 (J6 & J7 in CW2)
5) Lift the top cover to the color wheel chamber
A
WD-73736 / WD-73835 / WD-73C8
Color Wheel Replacement
(Part # 938P137010)
wheel chamber can cause abnormalities in the picture.
(Picture CW1)
(Picture CW2)
(Continued on next page)
Page 26
B
J6
J7