Making A Connection To A Wap Service - Nokia THR880 User Manual

M e n u f u n c t i o n s
• Password - Key in the password and press OK.

Making a connection to a WAP service

Firstly, make sure that the service settings of the WAP service you want
to use are activated. To activate the settings:
• Press Menu and select Services
settings and scroll to the set you want to activate and press Activate.
Secondly, make a connection to the WAP service. There are three ways
to connect:
• Open the homepage of the WAP service:
Press Menu and select Services
Tip: To quickly open the homepage of a WAP service:
in standby mode, press and hold
Or
• Select a bookmark of the WAP service:
Press Menu, select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service
settings, activate another set of service settings and try again.
Or
• Key in the address of the WAP service:
Press Menu and select Services
of the WAP service, press
Note that it is not necessary to add the prefix http:// in front of the
address since it will be added automatically.
The indicator is shown on the top left of the display when you are
connected to a WAP service. If there is an incoming (or outgoing) phone
call during the connection, the connection is suspended and the
indicator is shown on the top right of the display.
Group calls and express calls are not possible when the indicator
shown. The express calls made to you, however, are changed to one-way
phone calls and you can receive them like normal phone calls.
86 Copyright © 2004 Nokia. All rights reserved.
and Settings. Select Active service
and Home.
.
and Go to address. Key in the address
for special characters, and press OK.
is