Making A Connection To A Wap Service - Nokia 7210 User Manual

M e n u f u n c t i o n s
• Login type - Select
Automatic.
• User name - Key in the user
name and press OK.
• Password - Key in the password
and press OK.
Settings when GPRS
selected data bearer
• GPRS access point
access point name and press OK.
An access point name is needed
to establish a connection to a
GPRS network. You obtain the
access point name from your
network operator or service
provider.
• IP address - Key in the address,
press for a dot, and press OK.
You obtain the IP address from
your network operator or service
provider.
• Authentication type
Secure or Normal.
• Login type - Select
Automatic. If you select
Automatic, the login type uses
the user name and password
keyed in the following settings. If
you select Manual, the login
information is required when
establishing a connection
• User name - Key in the user
name and press OK.
• Password - Key in the password
and press OK.
60
Manual or
is the
- Key in the
- Select
Manual or
Copyright © 2004 Nokia. All rights reserved.
Making a connection to a
WAP service
Firstly, make sure that the service
settings of the WAP service you
want to use are activated. To
activate the settings:
• Press Menu, and select
and Settings. Select
service settings
set you want to activate and
press Activate.
Secondly, make a connection to the
WAP service. There are three ways to
connect:
• Open the homepage of the WAP
service:
Press Menu, and select
and Home.
Tip: To quickly open the
homepage of a WAP
service, press and hold
in standby mode.
OR
• Select a bookmark of the WAP
service:
Press Menu, and select Services,
Bookmarks, and select a
bookmark.
If the bookmark does not work
with the current active service
settings, activate another set of
service settings and try again.
Services
Active
and scroll to the
Services