Panasonic SC-HTR310 Operating Instructions Manual page 25

See page 37 for digital signals that can be played on this system.
1
2
or
or
3
Start play on the other equipment.
You can enjoy the variety of surround effects. (
4
After playback, reduce the volume level and turn off.
Note
• Depending on the playback source, you may feel the volume of the subwoofer or center speaker is not balanced with
the volume of the front speakers. In this case, you can adjust the speaker volume during playback. (
• Even if you switch input to sources other than "BD/DVD ", images (or audio) of the equipment connected to BD/DVD
terminal are output from TV output terminal.
Enjoying images and audio when this system is OFF
• When image equipment such as TV and recorder is connected to this system via HDMI (
signals from the recorder go through this system and are transmitted to TV even if this system is turned off. (Standby
through function) This is convenient to enjoy only with TV speaker.
• Images recorded with x.v.Colour (
Note
When you turn this system off, the audio/video signals from a recorder connected to this system's BD/DVD HDMI input terminal
are output through the television, even if you have set input on this system to anything other than "BD/DVD ". (The selector
returns to the previous setting when you turn this system on again.)
Playing a DVD recorder with built-in VCR
If the equipment has the output terminal specifically for DVD/VHS, select input as described in step 2
above.
To enjoy DVD: select "AUX 1 ".
•
To enjoy video: select "AUX 3 ".
•
To turn on the system
Press the button.
To select the source
Press one of these
buttons.
To adjust the volume
Press the buttons.
page 38) are also supported.
TV : TV
BD/DVD : Blu-ray Disc player/
DVD recorder
AUX 1
: AUX1 terminal
AUX 2 : AUX2 terminal
AUX 3
: AUX3 terminal
"AUX 1", "AUX 2" and "AUX 3"
switch every time you press [AUX].
pages 26 and 27)
(factory setting)
0 (Min) to 50 (Max)
page 29)
page 17), images/audio
25
RQTX0151