Ac Mains Supply Connection - Panasonic SC-HTR310 Operating Instructions Manual

AC mains supply connection

Connect AC mains lead after all other cables are connected.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
Amplifier
Insertion of connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
There is however no problem using the system.
Note
• The included AC mains lead is for use with this system only. Do not use it with other equipment.
• Also, do not use AC mains lead for other equipment with this system.
Conserving power
This system consumes a small amount of power, even when it is in standby mode (approx. 0.7 W). To save power when the system
is not to be used for a long time, unplug it from the household mains socket. You will need to reset some memory items after
plugging in this system.
"Standby" indicator
Standby indicator
Standby/on switch
22
RQTX0151
AC mains lead
(included)
Household mains socket
(AC 230 V to 240 V, 50 Hz)
VOLUME
WHISPER MODE
INPUT
SURROUND SELECTOR
Appliance inlet
Connector
Approx. 6 mm
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
Standby indicator [^]
When the unit is connected to the AC mains supply, this indicator lights
up in standby mode and goes out when the unit is turned on.