Panasonic SC-HTR310 Operating Instructions Manual page 14

Installing and assembling the rack
Setting the caster stoppers
Set the caster stoppers (included) under
the casters to fi x this system and prevent
from moving.
• When setting the caster stoppers, match the front side of
caster with the arrow of the caster stopper.
Front
• Lift the rack to remove caster stoppers. See page 11
about how to lift the rack.
Stabilising the television
Attach the television to the rack to prevent it from falling over.
Fixing to the rack
• Attach the fall-prevention band etc. supplied with TV using
the included screws as illustrated at right. (If the fall-pre-
vention band is not supplied with TV, use a commercially
available band to fi x.)
Attach the fall-prevention band to the prepared hole in the
center of the underside of the top board.
If the hole is not positioned at a suitable place, drill
approx. 2 mm hole on the underside and attach the band
with the screw.
• If you fasten the screw too tightly, it goes around in circles
and the TV cannot be fi xed.
Fixing to the wall
• Use commercially available screws, strong string or chain
suitable for materials of the wall or pillar to fi x to the solid
parts.
• Walls and pillars must be strong enough to support the
weight of TV. Ask installation personnel for more informa-
tion.
• Fix 2 parts at both left and right.
14
RQTX0151
Caster stopper
Arrow
(Caster stopper position)
Set the caster stoppers under 4 casters circled with the
dotted line of fi gure below.
SC-HTR310
Front side
(Bottom side)
(Setup example)
Screw (included)
(Setup example)
The illustration is an example.
The shape may differ from the actual product.
SC-HTR210
Front side
(Bottom side)
Fall-prevention
band
Prepared
screw hole