Quick Start Guide; Step 1: Prepare The Sd Card And Power; Tascam Lr- - Tascam LR-10 Owner's Manual

Quick Start Guide

Step 1: Prepare the SD card and
power
Install the SD card
ª
Insert the SD card into the SD card slot, which is inside the
battery compartment on the bottom of the unit.
Formatting is necessary if you insert a new SD card.
(Formatting will erase all the data on the card.)
For details, see "Inserting and removing SD cards" on page 39.
10

TASCAM LR-10

Preparing the power
ª
Using AA batteries
Insert AA batteries into the battery compartment, which you
opened when installing the SD card. This unit can use either
alkaline or nickel-metal hydride (Ni-MH) batteries. It cannot
recharge batteries.