Specifications; Safety Warnings And Precautions - Central Pneumatic 92917 Assembly And Operating Instructions Manual

Unit Weight
Housing Material
Fastener Length Capacity
Fastener Thickness
Magazine Capacity
Operating PSI
Air Consumption
Triggering Type
Accessories
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Keep work area clean. Cluttered areas invite injuries.
1.
Observe work area conditions. Do not use machines or power tools in damp or
2.
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let
3.
them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for which
SKU 92917 & 93253

Specifications

92917
Aluminum Alloy
Full-Sequential Safety Mechanism
5 mm Hex Wrench, Pneumatic
Tool Oil, Coil of 120 Nails,
Carrying Case
Save This Manual

Safety Warnings and Precautions

Read all instructions before using this tool!
For technical questions, please call 1-800-444-3353.
8 lb.
3/4" to 1-3/4" Long
0.12" Diameter (Approximately)
120 Nails
70 to 100
2.5 CFM @ 90 PSI
5 mm Hex Wrench, Pneumatic
93253
6 lb.
Magnesium
Tool Oil
REV 09/05; 12/05
Page 2