Specifications; Safety Warnings And Precautions - Central Pneumatic 41209 Assembly And Operating Instructions Manual

Operating Air Pressure
Air Consumption
Magazine Capacity
Fastener Lengths / Gauge Size
Air Inlet
Trigger Mechanism Type
Sound Level
Tool Length
Tool Width
Tool Height
Tool Weight
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Do not expose to rain. Keep work area well lit. Do not use
electrically powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attach-
SKU 41209 For technical questions, please call 1-800-444-3353.

Specifications

Item
Save This Manual

Safety Warnings and Precautions

Description
65-100 PSI
11 CFM (Non-continuous)
120 Fasteners
7/8", 1", 1-1/4", 1-1/2", 1-3/4" – 11 Gauge
1/4"-18 NPT
Contact Safety Trip Mechanism
95dB
10-1/4"
4-3/4"
10-1/8"
5.5 Pounds
Page 2