Standard Horizon MATRIX GX2100 Owner's Manual page 74

Saving a Position Report as a Waypoint
The GX2000/GX2100 can save a Position Report call in the radios memory as
a waypoint.
1. After the Position Report call has been re-
ceived: Press the [ SAVE ] soft key.
2. Rotate the CHANNEL knob to change the first
letter in the name of the waypoint and press
the [ ENT ] soft key.
3. Repeat step 2 until the WPT Name is entered.
4. Press and hold the [ ENT ] soft key to save the waypoint into memory.
Navigating to a saved waypoint
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Select "GENERAL SETUP" with the CHANNEL
knob.
3. Press the [ SELECT ] soft key, then select "DIS-
PLAY" with the CHANNEL knob.
4. Rotate the CHANNEL knob to select
"WAYPOINT" and press the [ ENT ] soft key.
5. Rotate the CHANNEL knob to select the
waypoint name and press the [ ENT ] soft key.
6. Press the [ ENT ] key so show the compass
display and to navigate to the waypoint. The
display indicates the distance and direction of the
saved waypoint, and also the compass indicates the
saved waypoint by dot ( ) .
Page 74 GX2000/GX2100