Standard Horizon MATRIX GX2100 Owner's Manual page 51

to the last selected working channel.
4. Press the [ WPT ] soft key to enter the "Waypoint In-
put" menu, then enter the desired waypoint name
(up to 11 characters), described previously (select
the letter/number by rotating the CHANNEL knob
and move the cursor by pressing the [ ENT ] / [ BACK ]
soft key).
6. The ID is the MMSI from the vessel in distress.
7. When you are finished entering the waypoint name,
press and hold the [ ENT ] soft key to replace the
display to the "WAYPOINT" Screen. The display in-
dicates the distance and direction of the distressed
vessel, and also the compass indicates the dis-
tressed vessel by dot ( ) .
8. To return to the radio operation:
1) Press and hold down the [ CALL ( MENU )] key until "Setup Menu" ap-
pears.
2) Rotate the CHANNEL knob to select "DSC SETUP" menu.
3) Press the [ SELECT ] soft key, then select "GENERAL SETUP" with the
CHANNEL knob.
4) Press the [ SELECT ] soft key, then select "NORMAL" with the CHANNEL
knob.
5) Press the [ SELECT ] soft key to return to radio operation.
You must continue monitoring channel 16 as a coast station may re-
quire assistance in the rescue attempt.
GX2000/GX2100
NOTE
Received DISTRESS
Name:VERTEX
ID:123456789
Since: 01:03
-DISTRESS INFO-
Nature of:Undesignate
DIST ID:123456789
WPT QUIT
Page 51