Standard Horizon MATRIX GX2100 Owner's Manual page 72

the directory, then press the [ SELECT ] soft
key.
5. Press the [ YES ] soft key to send your posi-
tion to the selected vessel.
6. Press the [ QUIT ] key to return to radio opera-
tion.
Manual Calling
This feature allows you to send your position to another vessel by manually
entering the MMSI of the ship you want to send your position to.
1. Press the [ CALL ( MENU )] key. The "DSC
Menu" will appear.
2. Rotate the CHANNEL knob to select "POS RE-
PORT". (To cancel, press the [ QUIT ] soft key.)
3. Press the [ SELECT ] soft key. The transceiver will
beep, and the "Position Report Call" menu will ap-
pear.
4. Rotate the CHANNEL knob to select
"MANUAL", then press the [ SELECT ] soft key.
5. Rotate the CHANNEL knob to select the first
number of the MMSI which you want to con-
tact, then press the [ SELECT ] soft key to step
to the next number.
6. Repeat step 5 to set the MMSI number.
7. If a mistake was made entering in the MMSI
number, repeat pressing the [ BACK ] soft key
until the wrong number is selected, then ro-
tate the CHANNEL knob to correct the entry.
8. When finished entering the MMSI number,
press and hold the Press the [ SELECT ] soft
key.
9. Press the [ YES ] soft key to send your position to the selected vessel.
10. Press the [ CLR ( WX )] key to return to radio operation.
Page 72 GX2000/GX2100