Writing And Editing Text - Siemens Gigaset C355 Manual

Appendix

Writing and editing text

The following rules apply when writing a
text:
The cursor is controlled with t s.
u
u
Characters are added to the left of the
cursor.
Press the star key P briefly to switch
u
from the "Abc" mode to "123", from
"123" to "abc" and from "abc" back to
"Abc" (upper case: 1st letter upper case,
all others lower case). Press the star key
P before entering the letter.
u Press the star key P and hold: Shows
the selection line of the characters
assigned to the star key.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Editing text (without predictive text)
When you press a key and hold it, the
characters of that key appear in the bot-
tom display line and are highlighted one
after the other. When you release the key
the highlighted character is inserted into
the input field.
The display briefly shows whether upper
or lower case letters or digits is selected
when you switch from one mode to the
next: The bottom text line displays "abc ->
Abc", "Abc -> 123" or "123 -> abc".
46
Editing text (with predictive text)
EATONI predictive text helps you when
you are writing text messages.
Each key between S and O is assigned
several letters and characters (see the
character set tables, page 47). These
appear in a selection line immediately
under the text panel (over the display
functions) as soon as you press a key.
The letter you are most likely looking for is
shown in reversed highlights and is at the
beginning of the selection line. It is copied
into the text panel.
Hi Peter, cannot
¼
come today. Ic
h
gi
˜ T
§Menu
1 Text of the message
2 Selection line
If this letter is the one you want, confirm it
by pressing the next key. If it is not the one
you want, briefly press the hash key û
repeatedly until the required letter is
shown in reversed highlights on the dis-
play line and copied into the text panel.
If you press and hold the hash key û, you
will see the selection line of characters
that are assigned to the hash key.
Deactivating/activating predictive text
Requirement: You are in the text entry
panel.
Press the control key.
§Menu§
Predictive Text
Select and press
1
2
(‰ = on).
§OK§