Siemens Gigaset C355 Manual page 20

Hide thumbs Also See for Gigaset C355:
Table of Contents

Advertisement

Opening lists with
the message key
You can use the message key f to open
the following lists:
u
SMS list
u
Answering machine list
u
Caller list
An advisory tone sounds as soon as a new
message arrives on a list. The message
key f flashes. In idle status, an icon
appears in the display for the new mes-
sage:
Icon
New message...
±
... in answering machine list or
network mailbox
Á
... in calls list
À
... in SMS list
The number of new entries is shown
beneath the corresponding icon.
When you press the flashing key f, you
will see all the lists that contain new mes-
sages. If only one list contains new mes-
sages, it opens immediately.
Key f goes out when a list opens and the
menu is closed. If there are other new
entries, you can set the message key flash-
ing again (page 17), e.g. to tell other
users about the new entries.
Note:
If calls are stored in the network mailbox you
will receive a message if the appropriate set-
tings have been made (see the network mail-
box instructions of your network provider).
Setting the message key flashing
Requirement: There is still at least one
new entry in one of the lists.
f
Open the calls list.
Select
Set MWI-LED
press
§OK§
a
Press and hold (idle status).
Key f goes out when a list opens and the
menu is closed.
and
.
Using the directory and lists
Calls list
Requirement: CLIP (page 11)
The numbers of the last 30 incoming calls
are stored. Depending on the
either
or only
tings
All Calls
stored (page 17).
Several calls from the same number are
stored depending on the type of list:
u
stored more than once.
All Calls
u
stored once (the last call).
Missed Calls
The calls list is displayed as follows:
Calls List: 01+02
Number of new entries + number of old, read
entries
Setting the list type for the calls list
¢
f
Calls List: 01+02
¢
q (select entry; page 14)
¢
¢
Calls List Settings
§Menu§
Select
Missed Calls
and press
a
Press and hold (idle status).
The entries in the calls list are retained
when you change the list type.
Answering machine list
With the answering machine list you can
listen to the messages on the answering
machine.
The answering machine list is displayed as
follows:
Answ. Mach.: 01+02
Number of new messages + number of old,
played back messages
Calls List Set-
are
Missed Calls
/
All Calls
(‰ = on).
§OK§
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents