Dab Operation - Panasonic SC-HC3DB Operating Instructions Manual

DAB (continued)
DAB reception method on this unit
Depending on the region there is a difference between
broadcast frequency and stations broadcast along the
same frequency. For this reason, a memory of receivable
stations should first be created and then selected from
those memorized stations as the reception method.
DAB Auto Scan
This function searches for currently receivable stations and
inputs them into unit memory.
When DAB is selected for the first time, this function starts
automatically.
Note
Even if the station is stored into memory, some stations
may not broadcast depending on the time of day etc. If this
occurs, "NO SERVICE" is displayed.
Station Memory Updating
When there is a station name change, or a new station
begins broadcasting, the unit memory is automatically
updated when:
• The previous station name is displayed by selecting
"STATION TUNE".
• One of the stations already broadcasting on the same
frequency with the new station is displayed by selecting
"STATION TUNE".
Note
• Deleting stations that are no longer broadcasting is not
automatic. If you want to delete a station, perform Auto
scan again and the new memory is created.
• When a new frequency begins broadcasting, stations
on the new frequency are not automatically added to
memory. Perform Auto scan to add them to memory.
Also, you may need to change the Auto scan range if the
new frequency is outside the factory set Auto scan range
(➡ page 13).
STATION TUNE
You can select stations from the memory created as
shown on page 10 in alphanumeric order. You can easily
select your favorite stations by using presets (➡ page 12).

DAB operation

1 Press [DAB/FM] to enter DAB mode.
The unit comes on.
Note
"SCAN FAILED" appears if no stations are memorized. If
this occurs, adjust the antenna and try Auto scanning or
change the Auto scan frequency range (➡ page 13).
2 Press [PLAY MODE] to select "STATION TUNE".
Each time you press the button:
"STATION TUNE"
3 Press [u/t] or [y/i] to select a station.
The station name changes in alphanumeric order.
DAB Auto Scan
Press and hold [PLAY MODE] until "DAB AUTO SCAN"
appears.
When a frequency is tuned by Auto scanning on this unit,
the ensemble corresponding to the frequency is displayed
for approximately 2 seconds.
Note
• When updating memory with Auto scan, preset stations
are not erased or changed.
• When a frequency cannot be received, the previous
memory is restored.
• Total stations received is displayed for approximately 2
seconds.
If you are selecting DAB for
the first time, "DAB AUTO
SCAN" is displayed, stations
that are currently receivable
are memorized.
When a frequency is tuned
the ensemble corresponding
to the frequency is displayed.
The station first in
alphanumeric order is
broadcast.
"PRESET TUNE"
11