Table of Contents
Advertisement
Remote-Control Operation
For detailed information concerning operation steps, etc., please
refer to the appropriate page to each unit and toe respective
operation instructions. For this system, you ccui listen to tapes or
compact discs, etc., by operating the remote controi transmiter
without using toe input seiectors.
Common operation controls
© Power switch
(Ioff/onH
Press this button to switch the unit ON or to the standby
condition. Note that there is no need to press this button if the
unit's power is ON. (If it is pressed, the unit wiii be switched to
the standby mode.)
(2)
Function seiector buttons
(CD 10 KEY, TUNER 10 KEY, DAT, PHONO)
These buttons are used to change toe functions of this remote
controi transmitter as well as the main unit.
(D
Equailzation function button (EQ ON/FLAT)
Press to select toe equalizer effect on or flat.
® Equaiization mode-seiect button (EQ MODE)
(D
Muting button (MUTING -20 dB)
This button Is used to temporarily attenuate ("mute") the
volume level. After pressing the button the volume level will be
reduced by 20 dB.
© Easy play buttons (EASY PLAY)
(See page 23.)
© Super bass button (SUPER BASS)
@ Sound effect level buttons
(T SOUND EFFECT A)
® Ambience enhancement button (SPACE)
® Volume level control buttons (T VOLUME A)
For adjustment of toe volume level.
▲: To increase the volume level.
▼: To decrease the volume level.
Tuner controls
[T] Sleep button (SLEEP)
Press this button to use the sleep timer function.
[2] FM mode button (FM MODE)
This button is used to change bad stereo reception to
Improved monaural sound when listening to an FM broadcast
station.
[3] Preset-tuning buttons (1-0)
These buttons are used to tune to broadcast stations that
have been preset in the unit's memory.
When these butbjns are used, be sure to first press the
TUNER 10 KEY: from the function selector buttons on toe
remote control bansmitter.
-
63
-
Advertisement
Table of Contents
