Dab Operation - Panasonic SC-PM46DB Operating Instructions Manual

DAB (continued)
DAB

DAB operation

DAB operation
Press [DAB] to enter DAB mode.
1
The unit comes on.
Note
"Scan Failed." appears if no stations are memorized. If this occurs,
adjust the antenna and try Auto scanning or change the Auto scan
frequency range. (➡ page 11)
Press [PLAY MODE] to select "STATION TUNE".
2
Each time you press the button:
"STATION TUNE"
3 Press [ /4] or [ /¢] to select a station.
The station name changes in alphanumeric order.
DAB Auto Scan DAB Auto Scan
Press and hold [PLAY MODE] until "DAB Auto Scan" appears.
When a frequency is tuned by Auto scanning on this unit, the ensemble
corresponding to the frequency is displayed for approximately 2
seconds.
Note
• When updating memory with Auto scan, preset stations are not
erased or changed.
• When a frequency cannot be received, the previous memory is
restored.
• Total stations received is displayed for approximately 2 seconds.
10
"PRESET TUNE"
Presetting Presetting
Presetting channel Presetting channel
Up to 20 channels can be set.
1 Press [ /4] or [ /¢] to select a station.
2 Press [PROGRAM].
3 Press the numeric buttons to select a channel.
4 To preset more stations, press [PLAY MODE] to select
"STATION TUNE" and then repeat steps 1 to 3.
Note
You cannot preset stations when the station is not broadcasting or
when you are selecting a secondary service.
Selecting a preset channel Selecting a preset channel
1 Press [PLAY MODE] to select "PRESET TUNE".
2 Press [ /4] or [ /¢] or numeric buttons to select a
channel.
Listening to the secondary Listening to the secondary service
Press the [DAB SECONDARY] to select the secondary service.
" " is displayed if there is a secondary service broadcast.
The secondary services are selected each time the button is pressed.
The primary service is returned to after the last secondary service.
DISPLAY
Display Display
Press [DISPLAY] to select the display.
The information scroll through the display.
Each time you press the button:
service