Table of Contents
Advertisement
DAB
(continued)
DAB operation
Press [RADIO] to select "DAB".
•
"SCAN FAILED" appears if no stations are memorised. If
this occurs, adjust the antenna and try Auto scanning or
change the Auto scan frequency range (➡ page 10).
Press [PLAY MODE] to select "STATION TUNE".
Each time you press the button:
"STATION TUNE"
Press [u/t] or [y/i] to select a station.
The station name changes in alphanumeric order.
DAB Auto scan
Press and hold [PLAY MODE] until "DAB AUTO SCAN"
appears.
When a frequency is tuned using Auto scanning, the ensemble
corresponding to the frequency is displayed for approximately
2 seconds.
•
When updating memory with Auto scan, preset stations will
be erased. Preset them again (➡ right).
•
Total stations received is displayed for approximately
2 seconds.
If you are selecting DAB for the
first time, "DAB AUTO SCAN"
is displayed, stations that
are currently receivable are
memorised.
When a frequency is tuned, the
ensemble corresponding to the
frequency is displayed.
The station first in alphanumeric
order is broadcast.
"PRESET TUNE"
Presetting
g Presetting channel
Press [u/t] or [y/i] to select the station.
Press [PROGRAM].
Press the numeric buttons to select the channel.
The station occupying a channel is erased if another station
is preset in that channel.
To preset more stations, press [PLAY MODE] to select
"STATION TUNE" and then repeat steps to .
•
Maximum channels presettable is 20.
•
You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
g Selecting a preset channel
Press [PLAY MODE] to select "PRESET TUNE".
Press [u/t] or [y/i] to select the channel.
•
Alternatively, press the numeric buttons to select the channel.
Listening to the secondary service
Press the [DAB SECONDARY] to select the secondary service.
"
" is displayed if there is a secondary service broadcast.
The secondary services are selected each time the button
is pressed. The primary service is returned to after the last
secondary service.
Display
Press [DISPLAY] to select the display.
The information scroll through the display.
Each time you press the button:
Dynamic label
(information about the
broadcast)
PTY display
(program type)
Ensemble label
(the name of the ensemble)
Frequency display
Time display
9
Hide quick links:
Advertisement
Table of Contents
