Before Requesting Service - Panasonic NV-VP33 Operating Instructions Manual

Dvd/cd player / video cassette recorder
Table of Contents

Advertisement

Before requesting service

There is no audio output and the sound
is distorted:
The VCR display is not lit:
The VCR display is lit, the device does
not respond to controls:
Error code «U
» or «H
appears:
The picture is disturbed when searching:
No picture appears on the screen:
The picture is cut off at its left or right
edge:
The remote control unit does not work
properly:
No messages are output
to the screen:
Check the connections.
Deactivate the Advanced Surround effect.
Check AC mains connection.
Device is set to recording stand-by or timer mode. Quit with TIMER button.
External recording control is turned on. Quit this with the EXT LINK button.
H
: This is indicative of a malfunction. The digits following «H» depend on what state your player is in.
Press
to put the player into stand-by mode, then briefly unplug and re-attach the AC mains cable.
»
Contact the aftersales service if this does not remove the problem.
Please state the error code displayed by the set.
This is a technical issue and not indicative of a malfunction.
Check the connections.
Verify that the correct video input of the TV set has been selected.
Check the Video menu's TV Aspect setting on the Setup screen.
Check that the player is directly plugged into the TV set's AV output and not to a video cassette recorder
between the two units.
Check the Zoom setting.
The remote control is sending the wrong frequency. Check whether VCR 1 or 2 is listed in the display
and change the frequency of the remote control.
Check the distance between the RC unit and the appliance (max. 7 metres).
Check the batteries in the remote control unit.
Point the remote control unit straight at the remote control signal sensor on the front panel.
Go to the DVD SETUP screen and set DISPLAY menu option On-screen Messages- to [On].
Go to the DVD SETUP screen and change the TV Aspect setting in the Video menu.
Go to the VCR menu Others and change the OSD setting.
GENERAL DISTORTIONS
39
24
40
39
17
2
41
17
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv-vp28Nv-vp23

Table of Contents