Panasonic NV-VP33 Operating Instructions Manual page 13

Connectors
DVD/VHS
COMMON OUT
COMPONENT VIDEO OUT
VIDEO
DVD OUT (PROGRESSIVE/
INTERLACE)
P Y
B
L L
AUDIO AUDIO
R R
P COAXIAL
R
DIGITAL AUDIO OUT
COAXIAL
Amplifier (example)
L R
Video Audio
Digital connectors (COAXIAL)
To play programmes with a 5.1-channel surround sound, connect
the digital audio output ( COAXIAL ) with an external Multi-channel
Dolby Digital Decoder, for example.
Prerequisites for making recordings with an external digital recorder
- The original disc must not be copy-protected.
- The recorder must be able to process signals with a scanning
frequency of 48 kHz/16 bit.
- You cannot make MP3/WMA recordings.
Adapt the Audio SETUP menu settings to the following:
PCM Digital Output: [Up to 48 kHz]
Dolby Digital / DTS Digital Surround / MPEG: [PCM]
Deactivate function Advanced Surround.
Connection to AV3 (front panel)
Connect your external unit (e.g. a video camcorder)
with the front panel input.
Just seize the L/Mono port for mono recording of the
INPUT
audio signal.
REPEAT
Use INPUT to select A3.
(only DVD)
41
39
LP
13