Panasonic NV-VP33 Operating Instructions Manual page 38

Functions menu
These settings are not available
for every disc.
Other Settings
Play Speed
x1.4
x1.3
AV Enhancer Off
x1.2
Play Menu x1.1
Normal
Picture Menu
x0.9
Audio Menu x0.8
x0.7
Display Menu
x0.6
Other Menu
Off
AV Enhancer Off
On
Repeat
Play Menu
A-B Repeat
Marker
Advanced Disc Review
Picture Mode
Picture Menu
Video Output Mode 625p
Transfer Mode
38
Play Speed: Select a factor by which to change the playback speed.
The audio output switches to PCM (2-channel).
AV-Enhancer: Automatically optimises and adapts the audio and video settings to the disc used.
The Picture and Audio menus are not available when this function is enabled.
Repeat: Allows you to repeat the current track or chapter.
A-B Repeat: Playback repeats a defined section between positions A and B of a title.
Press ENTER to set starting point A and end point B. If you do not set point B, the end of the track
is used as the end point. Press ENTER to terminate this function.
Marker: Up to 5 positions can be tagged pressing ENTER. Press CANCEL/RESET to delete any mistakes.
Select a marker and press ENTER. Playback starts at the marker tag.
The markers are cleared by opening the disc tray or switching off the appliance.
Advanced Disc Review: For a fast review of the disc.
Off
The Picture Menu functions are not available when the AV-Enhancer function is turned on.
* *
Picture Mode: Changes the image display settings
Normal:
Factory default
Cinema1:
Cinema function for viewing in dark
rooms. Bright picture areas are dimmed
Normal
down.
Auto Video Output Mode: To switch to progressive output of the COMPONENT VIDEO OUT connection, e.g.
to connect a plasma screen, select [625p].
RGB mode must be turned off for you to use this function.
If the television picture does not display correctly with this setting [625p], press CANCEL/RESET for approx. 6 seconds
to reset the selection.
Transfer Mode:
For a PAL output signal
Auto: Movies with 25 frames per second are recognized
and appropriately converted.
Video: Select this option if the video is distorted with the
[Auto] option.
Cinema2:
Enhances brighter areas
of dark scenes.
Animation: Intensifies the colours.
Dynamic:
Brightens up the picture.
For an NTSC output signal
Auto1 (normal): Movies with 24 frames per second are
recognized and appropriately converted.
Auto2: Suitable for movies with 30 frames per second in
addition to movies with 24 frames per second.
Video: Select this option if the video is distorted with the
[Auto1] and [Auto2] options.
AV
ENHANCER
INPUT
REPEAT
36
40
40