Setup Menus - Panasonic NV-VP33 Operating Instructions Manual

SETUP menus

To display the Setup menu
Press SETUP to display the DVD Setup menu.
Press to select a sub-menu, then press
Press to select the option to be changed,
then press ENTER to confirm.
Press to select a setting option, then press
ENTER to confirm.
Press to select the next menu item.
Press RETURN to quit the menu.
DVD Setup
Disc
Audio
Video
Subtitle
Audio
Menus
Display
Others
Advanced Disc Review
Ratings
to select and press ENTER
4:3 TV aspect ratio
Letterbox: Pan&Scan:
40
Menu Disc
Audio
Subtitle
Menus
.
Advanced Disc Review
Ratings
English
Automatic
English
Menu Video
TV Aspect
Interval Mode
Level 8
Time Delay
RETURN to exit
AV1 Output
Still Mode
NTSC Disc Output
Disc's Audio language / Subtitle language / Menu language.
Select the preferred language of either of the items. If the language you want
is not on the list, select [Other] and type in the appropriate country code (see
(Must be supported by the disc.)
last page).
For quickly reviewing the disc. Intro Mode plays approx. 7 seconds of each title/
programme (RAM) on a disc / Interval Mode plays scenes that are 10 minutes
apart.
Assign a ranking to disallow the viewing of some scenes [1-7] or the entire DVD
video disc [0], and specify a password to guard access to the disc contents.This
feature is not supported by all DVD video discs.
Type in a 4-digit code using the numeric key pad of your remote control unit,
then press ENTER to confirm it.
Press or CANCEL/RESET to delete any mistakes.
A closed padlock icon is displayed while this feature is enabled. Make sure
not to forget your password code.
To change the setting
Enter your password code and press ENTER to confirm.
Change the setting as appropriate and press ENTER to confirm.
Sets the aspect ratio to 16:9 or 4:3 (Pan&Scan/Letterbox).
When using an audio amplifier together with a plasma TV or a digital TV, the
picture can be delayed in relation to the sound signal. You can synchronize the
picture signal with the sound using the Time Delay setting.
Selects the video signal from the scart socket (Video, RGB). You cannot use the
COMPONENT VIDEO OUT connection in RGB mode.
Select a picture quality for still image mode:
Automatic: The unit selects the optically better type of image.
Field: Poorer quality than a picture frame.
Frame: Although the image may be somewhat fuzzy, its quality is
better than that of a field-based still image.
To play a NTSC disc, select a colour rendition standard (NTSC/PAL60) that
matches the function of your TV set.