Align Focus For Desired Composition; Orientation Detection Function; Taking Pictures With Zoom - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Taking pictures with your own settings
(Continued)
[PROGRAM AE] Mode
Recording Mode:

Align focus for desired composition

Useful when subject is not in centre of picture.
First adjust focus according to subject
Align the AF area
with the subject
Hold down halfway
AF area
Return to desired composition
Press fully
AF area

Orientation detection function

Still pictures taken with the camera held vertically are automatically played back vertically.
(Only when [ROTATE DISP.] is set to [ON])
●
Still pictures taken with the lens surface facing directly up or down and still pictures
taken on other cameras may not be rotated. Additionally, still pictures taken while
holding the camera upside down are not rotated automatically.
●
Motion pictures are not displayed vertically.
●
The focus display flashes and beep sounds when focus is not
aligned.
Use the focus range displayed in red as a reference.
Even if the focus display is lit, the camera may be unable to
bring the subject into focus if it is out of range.
●
AF area is displayed larger in dark conditions or when using
Digital Zoom.
●
Most displays are temporarily cleared from screen when the
shutter button is pressed halfway.
38
VQT2R48
●
Subjects/environments which may
make focusing difficult:
• Fast-moving or extremely bright
objects, or objects with no colour
contrast.
• Taking pictures through glass or near
objects emitting light. In dark, or with
significant jitter.
• When too close to object or when
taking pictures of both distant and
close objects together in the same
picture.
●
We recommend using the 'Face
Detection' function when taking
pictures of people (→99).
Focus display
Focus range

Taking pictures with zoom

Recording Mode:
You can zoom in up to 12 times with 'Optical Zoom', and up to 23.4 times with 'Extra
Optical Zoom' (pictures only) with lower picture quality. To zoom further, you can use
[i.ZOOM] or [DIGITAL ZOOM].
Do not block the lens barrel movement
while zooming.
■
Zoom types
Type Optical Zoom
Maximum 12 ×
ratio
Picture quality No
deterioration
Operation None
conditions
Screen
display
Type i.Zoom
Maximum Approx. 1.3 × the Optical Zoom or Extra
ratio Optical Zoom
Picture quality Almost none
deterioration
Conditions, i.Zoom functions in the following cases.
etc. • ([INTELLIGENT AUTO] Mode)
• Scene Mode (except for [HIGH
SENS.], [HI-SPEED BURST], [FLASH
BURST], [PIN HOLE])
• ([CLIPBOARD] Mode)
• When [I.RESOLUTION] in the [REC]
menu is set to [i.ZOOM] (→41)
Screen
display
is displayed
Zoom In/Out
Capture a Enlarge
wider area the subject
(wide-angle) (telephoto)
W side (wide-angle) T side (telephoto)
Focus
range
Zoom ratio
(approx.)
Zoom bar
●
Zoom speed can be adjusted.
Zoom slowly → turn slightly
Zoom quickly → turn completely
●
Adjust the focus after adjusting the zoom.
Extra Optical Zoom
Up to 23.4 × (Depending on the picture
size)
No
(However, the picture size is reduced)
Set [PICTURE SIZE] in the [REC] menu
to a setting for which is displayed (→95)
is displayed
Digital Zoom
Up to 4 × the original zoom ratio
Yes
When [DIGITAL ZOOM] in the [REC]
menu is set to [ON] (→43)
Digital Zoom area is displayed
VQT2R48
39