Determine Aperture And Record; [Aperture-Priority] Mode; Determine Shutter Speed And Record; [Shutter-Priority] Mode - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Determine aperture and record

[APERTURE-PRIORITY] Mode

Recording Mode:
When recording, you can control the range of focus (depth of field) to meet your recording
purposes.
Shutter speed is automatically adjusted to be appropriate for the set aperture value.
Aperture value
■
Aperture values that can be set
Aperture value
F4.0 - F6.3
F3.5
F3.3
• Aperture values that can be set vary depending on the zoom position. (The above table
is at Max. W)
●
LCD monitor brightness may vary from the actual still picture recorded.
●
If too bright, increase the aperture, and if too dark, reduce the aperture.
56
VQT2R48
Set to
(recording)
Set to
([APERTURE-PRIORITY] Mode)
Determine aperture value
• When the aperture value is
increased, the range of depth in
focus expands, and the picture
shows up clearly from the position
of the camera to the background.
• When the aperture value is
reduced, the range of depth
in focus shrinks, and the
background can get blurry.
• When the picture is too bright
or too dark or there is incorrect
exposure, the numbers for the
aperture value and shutter speed
are shown in red.
Shutter speeds (seconds) set on this camera
8 - 1/2000
8 - 1/1600
8 - 1/1300

Determine shutter speed and record

[SHUTTER-PRIORITY] Mode

Recording Mode:
When recording, you can control the shutter speed to meet your recording purposes.
Aperture is automatically adjusted to be appropriate for the set shutter speed.
Shutter speed
■
Shutter speeds that can be set
Shutter speed (seconds)
8 6 5
2.5 2 1.6 1.3
1/1.3 1/1.6 1/2 1/2.5
1/4 1/5 1/6 1/8
1/13 1/15 1/20 1/25
1/40 1/50 1/60 1/80
1/125 1/160 1/200 1/250
1/400 1/500 1/640 1/800
1/1300
1/1600
1/2000
• Aperture values that are set vary depending on the zoom position. (The above table is
at max. W.)
●
LCD monitor brightness may vary from the actual still picture recorded.
●
When using a slow shutter speed, it is recommended to use a tripod.
●
In [SHUTTER-PRIORITY] Mode,
Set to
(recording)
Set to
([SHUTTER-PRIORITY] Mode)
Determine shutter speed
• At faster shutter speeds,
movements by the subject show
as if they are still.
• At slower shutter speeds,
subjects that are moving show
as jittery.
• When the picture is too bright
or too dark or there is incorrect
exposure, the numbers for the
aperture value and shutter speed
are shown in red.
Aperture values set on this camera
4 3.2
1
1/3.2
1/10
1/30 F3.3 - F6.3
1/100
1/320
1/1000
F3.5 - F6.3
F4.0 - F6.3
cannot be set.
VQT2R48
57