Using The [Motion Picture] Menu; [Rec Mode]/ [Rec Quality]; [Continuous Af]; [Wind Cut] - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Using the [MOTION PICTURE] menu

●
For [MOTION PICTURE] menu setting procedures (→20)
●
'Quick menu' (→112) is useful to easily call up frequently-used menus.
Sets the data format of the motion picture that is recorded.
■
Recording Mode:
■
Settings:
Recording format
[AVCHD Lite(GPS These are AVCHD Lite motion pictures to which location name
REC)] ∗
information from the start of recording has been added.
[AVCHD Lite] ∗
This is a data format suitable for playback on high-definition TVs.
This is a data format suitable for playback on computers that allows
even small picture sizes to be recorded. Location name information
[MOTION JPEG]
from the start of recording can also be recorded.
∗ When the term "AVCHD Lite motion picture" is used in this manual, it means a motion picture
recorded in [AVCHD Lite(GPS REC)] or [AVCHD Lite].
●
The [REC QUALITY] options vary based on the setting.
●
If a card is not loaded in the camera, the motion picture is automatically recorded in [MOTION
JPEG] ([REC QUALITY]: [QVGA]).
●
Even when devices are compatible with motion pictures recorded with this camera, the playback
may have poor picture or sound quality, or playback may not be possible. Also, the recording
information may not be displayed properly. In this case, use this unit.
For details on AVCHD compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
●
AVCHD Lite motion pictures cannot be played back on devices not compatible with AVCHD (such as
conventional DVD recorders). Also, motion pictures recorded in [AVCHD Lite(GPS REC)] cannot be
played back with Panasonic digital cameras (LUMIX) compatible with AVCHD (Lite) recording that
were sold in or before 2009.
●
If positioning fails and location name information is not saved, the location name information is not
recorded.
●
Because AVCHD Lite motion pictures do not conform to DCF and Exif, some information (such as
picture number, White Balance, etc.) is not displayed during playback.
●
Using a card of SD speed 'Class 4' ∗ or above is recommended for recording motion pictures in
[AVCHD Lite(GPS REC)]/[AVCHD Lite].
Using a card of SD speed 'Class 6' ∗ or above is recommended for recording motion pictures in
'MOTION JPEG'.
∗ The SD speed class is a speed rating for continuous writing.
●
To play back AVCHD Lite motion pictures using a computer, please use the 'PHOTOfunSTUDIO'
software on the CD-ROM supplied.
Sets the picture quality of the motion picture that is recorded.
■
Recording Mode:
108
VQT2R48
[REC MODE]
Effect
[REC QUALITY]
For [MOTION PICTURE] menu setting procedures (→20)
■
Settings:
[AVCHD Lite(GPS REC)] in [REC MODE]
Setting Resolution
[GSH] 1280 x 720
[GH] 1280 x 720
[GL] 1280 x 720
[AVCHD Lite] in [REC MODE]
Setting Resolution
[SH] 1280 x 720
[H] 1280 x 720
[L] 1280 x 720
[MOTION JPEG] in [REC MODE]
Setting Resolution
[HD] 1280 x 720
[WVGA] 848 x 480
[VGA] 640 x 480
[QVGA] 320 x 240
∗
The bit rate is the amount of data per unit time. A higher value translates into a higher image
1
quality. This camera uses the VBR (Variable Bit Rate) recording system and the available
recording time is shorter when recording a subject with rapid movements.
∗
2 The frame rate is the number of frames per second.
●
[WVGA] cannot be set in [INTELLIGENT AUTO] Mode.
●
[QVGA] only can be recorded to the built-in memory.

[CONTINUOUS AF]

Either allow the focus to be constantly adjusted during motion picture recording, or fix the
focus position at the start of recording.
■
Recording Mode:
■
Settings: [ON] : Adjust focus according to movement of subject during motion picture
recording. ( appears on the screen.)
[OFF] : Fix focus position at the start of motion picture recording.
Use this setting to keep the same focus position for subjects with
little forward/backward movement.
●
The setting is fixed to [OFF] in [STARRY SKY] and [FIREWORKS] Scene Modes.

[WIND CUT]

Reduces recording of wind sounds (wind noise) when recording in a strong wind
■
Recording Mode:
■
Settings: [OFF]/[ON] ( appears on the screen.)
●
When [WIND CUT] is set to [ON], lower sounds will be eliminated and the sound quality
will differ from that of normal recordings.
Bit rate ∗
Aspect ratio
1
17 Mbps
13 Mbps 16:9
9 Mbps
Bit rate ∗
Aspect ratio
1
17 Mbps
13 Mbps 16:9
9 Mbps
Frame rate ∗
Aspect ratio
2
30 fps
16:9
30 fps
30 fps
4:3
30 fps
109
VQT2R48