Names Of Parts; Cursor Button; Charging Battery - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Names of parts

Camera ON/OFF switch
(→19)
Shutter button
Mode dial
Flash
Self-timer indicator
AF Assist Lamp
Lens barrel
Zoom lever
Lens
(→39)
(→7)
Microphone
(→76, 106)
Speaker
(→22, 115)
LCD monitor
(→6, 23, 46, 152, 158)
REC/PLAY switch
(→32)
[EXPOSURE] button
(→56, 57, 58)
[DISPLAY] button
(→46)
Q.MENU /
(Quick setting →112)
Delete button
(→45)

Cursor button

[MENU/SET]
(menu display/set/finish) (→20)
Left cursor button (◄)
• Self-timer (→52)
Down cursor button (▼)
• Macro Mode (→49)
• AF Lock (AF Tracking) (→36, 99)
●
In this manual, the button that is used is shaded or indicated by▲▼◄►.
●
The appearance, specifications, and screen display vary depending on the model that is used.
10
For the DMC-TZ10/DMC-ZS7 (→9)
VQT2R48
Card/Battery door
Tripod receptacle
(→34)
(→33)
(→47)
DC coupler cover
/
(→52)
(→15)
(→106) Release lever
Hand strap eyelet
We recommend
using the supplied
hand strap to
avoid dropping
the camera.
[AV OUT/
DIGITAL]
socket
(→141, 144, 147)
[E.ZOOM] button
(→42)
Up cursor button (▲)
• Exposure Compensation (→53)
• Auto Bracket (→54)
• Multi Aspect (→55)
• White Balance fine adjustment
(→98)
Right cursor button (►)
• Flash (→47)

Charging battery

Always charge before first use! (not sold pre-charged)
■
About batteries that you can use with this unit
(→14)
It has been found that counterfeit battery packs which look very similar to the
genuine products are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of a
counterfeit battery pack. To ensure that safe products are used we recommend
that a genuine Panasonic battery pack is used.
(→14)
• Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can be used
safely. The dedicated battery supports this function. The only batteries
suitable for use with this unit are genuine Panasonic products and batteries
manufactured by other companies and certified by Panasonic. (Batteries which
do not support this function cannot be used). Panasonic cannot in any way
guarantee the quality, performance or safety of batteries which have been
manufactured by other companies and are not genuine Panasonic products.
Insert the battery terminals and attach the battery
to the charger
Ensure [LUMIX] faces outwards.
Connect the charger to the
electrical outlet
●
Plug-in type
Battery
(model-specific)
Charger
(model-specific)
Detach the battery after charging is
completed
●
Inlet type
Charging light
([CHARGE])
On: Charging in progress
(approx. 130 min. if fully
depleted)
• The AC
Off: Charging complete
cable does
not fit
If light is flashing:
entirely into
• Charging may take longer
the AC input
terminal. A gap will remain.
than normal if battery
temperature is too high or
too low (charging may not be
completed).
• Battery/charger connector is
dirty. Clean with a dry cloth.
1
2
11
VQT2R48