Align Focus For Desired Composition - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Operating instructions for advanced features
Table of Contents

Advertisement

Taking pictures with your own settings
(Continued)
[PROGRAM AE] Mode
Recording mode :

Align focus for desired composition

Useful when subject is not in centre of picture.
First adjust focus according to subject
Align the AF area
with the subject
Hold down halfway
AF area
Return to desired composition
Press fully
AF area
Direction detection function
Still pictures taken with the camera held vertically are automatically played back vertically.
(Only when [ROTATE DISP.] is set to [ON])
Still pictures taken with the lens surface facing directly up or down and still pictures
taken on other cameras may not be rotated. Additionally, still pictures taken while
holding the camera upside down are not rotated automatically.
Motion pictures are not displayed vertically.
The focus display flashes and beep sounds when focus is not
aligned.
Use the focus range displayed in red as a reference.
Even if the focus display is lit, the camera may be unable to
bring the subject into focus if it is out of range.
AF area is displayed larger in dark conditions or when using
digital zoom.
Most displays are temporarily cleared from screen when the
shutter button is pressed halfway.
38
VQT2R24
Subjects/environments which may
make focusing difficult:
• Fast-moving or extremely bright
objects, or objects with no colour
contrast.
• Taking pictures through glass or near
objects emitting light. In dark, or with
significant jitter.
• When too close to object or when
taking pictures of both distant and
close objects together in the same
picture.
We recommend using the 'Face
detection' function when taking pictures
of people (→97).
Focus display
Focus range
Taking pictures with zoom
Recording mode :
You can zoom in up to 12 times with 'optical zoom', and up to 23.4 times with 'Extra
optical zoom' (pictures only) with lower picture quality.
ZOOM] or [DIGITAL ZOOM].
Do not block the lens barrel movement
while zooming.
Zoom types
Type
Optical zoom
Maximum
12 ×
ratio
Picture quality
No
deterioration
Operation
None
conditions
Screen
display
Type
iA Zoom
Maximum
Up to 1.3 × the optical zoom or Extra
ratio
optical zoom
Picture quality
Almost none
deterioration
Conditions,
iA Zoom functions in the following cases.
etc.
([INTELLIGENT AUTO] Mode)
Scene mode (except for [HIGH
SENS.], [HI-SPEED BURST], [FLASH
BURST])
([CLIPBOARD] Mode)
When [I.RESOLUTION] in the [REC]
menu is set to [iA ZOOM] (→41)
Screen
display
is displayed
To zoom further, you can use [iA
Zoom In/Out
Capture a
Enlarge
wider area
the subject
(wide-angle)
(telephoto)
W side (wide-angle)
T side (telephoto)
Focus
range
Zoom ratio
(approx.)
Zoom bar
Zoom speed can be adjusted.
Zoom slowly → turn slightly
Zoom quickly → turn completely
Adjust the focus after adjusting the zoom.
Extra optical zoom
Up to 23.4 × (Depending on the picture
size)
No
(However, the picture size is reduced)
Set [PICTURE SIZE] in the [REC] menu
to a setting for which
is displayed (→93)
is displayed
Digital zoom
Up to 4 × the original zoom ratio
Yes
When [DIGITAL ZOOM] in the [REC]
menu is set to [ON] (→43)
Digital zoom area is displayed
VQT2R24
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-tz9Lumix dmc-tz8

Table of Contents