Adjusting The Freezer Drawer Level - Samsung French Door Refrigerator User Manual

1. If you open the drawer (
2. Insert the supplied hex wrench (
3. Please adjust the height turning the hex wrench (
counter-clockwise(
When you turn the hex wrench counter-clockwise( ), the door will move up.
4. After adjusting the doors, please insert the supplied fastener-ring (
a pair of pliers (
hinge( ). The number of fastener-rings you'll need to insert depends on the
8
gap.
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 1mm(0.04 inch).

ADJUSTING ThE FREEZER DRAWER lEVEl

Adjustment part
1. Locate the height-adjuster (
Unscrew the four Phillips screws (
2. Loosen the controller screw(
12_Setting Up
), you can see the lower hinge (
1
) into the shaft (
3
).
2
3
4
1
) in the gap between the hinge-grommet (
6
) in the freezer drawer.
1
) slightly to loosen the door.
2
) with a Phillips screwdriver.
3
1
2
).
2
) of the lower hinge.
4
) clockwise( ) or
3
3
) using
5
) and the lower
7
Freezer Drawer
3