Power On And Off - Sharp AR-281 Operation Manual

POWER ON AND OFF

The power switch is located on the left side of the copier. When the
power switch is turned to the "ON" position, the message "WARMING
UP. PLEASE WAIT." will appear in the message display. Warming
Power on
up takes about 65 seconds. Once the copier is ready, the message
display will change to "READY TO COPY.", and the START (
) key
indicator will light up, indicating that copying is possible.
If the copier has been programmed in the auditing mode, the message
"ENTER YOUR ACCOUNT NUMBER. -----" will appear after warming
up. Once a valid account number has been entered, copying will
become possible.
Power off
1-5