MISFEED REMOVAL
The copier will stop when a misfeed occurs. The misfeed
(
) indicator will blink, and blinking red misfeed location
indicators will indicate the approximate misfeed location.
30
First confirm the misfeed location.
Misfeed in the bypass tray
Gently pull the misfed paper out.
1
Lift slightly on the side cover and slide the cover out
2
until it stops. Close the side cover by pressing the
handle on the cover.
G
The misfeed (
Misfeed in the copier
Open the bypass tray. Lift slightly on the side cover and
1
slide the cover out until it stops.
If paper is accidentally torn during removal, be sure to
remove all pieces.
Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see their respective
sections of the operation manual.
(
P. 63)
(
P. 30, 33)
(
P. 34)
(
P. 73)
) indicator will go out.