Setting The Date And Time; Setting The Handset Volume; Setting The Ringer - Gigaset DA610 Manual

Setting the date and time

You can adjust the current date manually and change the format of the
display. The time is updated by incoming calls with telephone number
displays. You can adjust this setting if necessary (
Setting the date and time
K 3
Activate setting mode for the date and time. The date and
time display becomes editable.
~
Enter a 4-digit date and a 4-digit time. Use the
key to move one position forwards/backwards.
K
Save your settings and exit the setting mode.
The date setting format is according to the one currently set. The time
setting format is always 24-hour, regardless of the set time format.
Setting the date format
K
Activate setting mode.
5
Press the key code for setting the date format.
Press the key code for the desired date format:
Q
for MM/DD e.g. 12/31 for 31 December
for DD/MM e.g. 31/12
2
for MM.DD e.g. 12.31
3
for DD.MM e.g. 31.12
K
Save your settings and exit the setting mode.
Setting the time format
K
Activate setting mode.
5 Q
Press the key code for setting the time format.
Press the key for the desired time format:
12-hour format
2
24-hour format
K
Save your settings and exit the setting mode.

Setting the handset volume

The handset volume can be set using the setting mode or changed
directly during the telephone conversation using the keys (
There are three adjustable levels.
K O
Activate setting mode for the handset volume.
Press the key code for the desired volume:
low
K
Save your settings and exit the setting mode.
Setting the mute behaviour and music on hold
You can define the behaviour of the microphone and the handset when
the telephone is muted and whether or not a melody is played.
K
Activate setting mode.
O #
Press the key code for mute setting.
Press the key code for the desired behaviour:
Q
Microphone and receiver off, melody on.
While in mute mode, the person on the other end of
the line hears a melody.
en fr fa ar
£
page 12).
q
£
2 3
medium high
2
K
Save your settings and exit the setting mode.
The mute function is activated according to these settings using the
mute key during a call (
control

Setting the ringer

¤
The following optional settings are available:
¤
Melody and volume
¤
VIP melody
Switching the ringer off
Setting the ring tone and volume
You can set the ring tone and volume or switch the ringer off. There are
10 different ring tones available and the volume can be adjusted to 5 lev-
els (0=silent).
Note
The ring tones are played over the speaker if you lift the handset
before commencing with the settings.
You can also change both settings directly using the keys while the tele-
phone is ringing (
K 5
Changing the ringer volume
Activate setting mode for the ringer volume. The currently
set ringer is played.
D E
/ Increase or decrease the volume for the ringer.
or
Q 4
... Select the desired value using the number keys.
K
Press the set key or
setting mode.
K M
Changing the ring tone
Activate setting mode for the ring tone. If you lift the hand-
page 7).
set, you will hear the currently set ring tone.
Q O
... Select the required ring tone.
K
Press the set key or
setting mode.
Note
The ring tone can only sound perfectly when the ring pulse arriving
from the telephone network is long enough. The length of the pulses
may differ from network to network. It is therefore possible that some
ring tones for selection may sound clipped. If this is the case please
select another ring tone.
Setting the VIP ring tone and volume
You can set one of the ringers as a VIP ring tone. If you have assigned VIP
status to a number from the phonebook (
from this number will be indicated by the VIP ring tone.
Microphone, receiver and melody off.
The telephone is completely muted.
Microphone off, receiver on, melody off.
You are still able to hear the person on the end of
the line, however they cannot hear you.
£
page 7).
£
page 7).
[
to save your settings and exit the
[
to save your settings and exit the
£
page 7), an incoming call
9