Connecting the telephone ¤ Connect the telephone connector (1) to the main phone socket using the supplied telephone cable and, if necessary, one of the telephone adapters ¤ provided. Guide the cable through the cable channel of the handset cra- dle: upwards for operating the phone on...
u For your safety and protection, Dialling and saving the telephone may not be used numbers in the bath or shower rooms (wet locations). The telephone is not Dialling a number splash proof. u Never expose the telephone to Lift the handset, dial sources of heat, direct sunlight or the number.
Dialling a speed dial number Press the mute key. To reactivate microphone: Press the Lift the handset, press mute key again or press any other the speed dial key. key. Press the speed dial Setting the ringer number key. Notes on saving and deleting You can set the ringer melody and programmable direct dial keys volume or turn it off.
Appendix Depending on your PABX, you may need to change your telephone’s dialling mode or the flash time. Care To do this, use the slid- Wipe the unit with a damp cloth or ing switch on the an antistatic cloth. Do not use sol- underside of the vents or microfibre cloths.
Protecting our environment subject to European Directive 2002/ 96/EC. Our environmental mission The appropriate disposal and sepa- statement rate collection of used equipment serve to prevent potential harm to We, Gigaset Communications GmbH, the environment and to health. They bear social responsibility and are are a precondition for the re-use and actively committed to a better world.