Using The Auto Clean Function; Using The D'light Cool Function - Samsung AQV30T Series User & Installation Manual

Using the Auto Clean function

Auto clean function will minimise the moisture inside of the indoor unit. Your indoor unit helps evaporates the moisture inside
of the unit. Activate this function to help provide you with clean air.

Using the d'light Cool function

The sensor in the indoor unit, which measures temperature and humidity in a room, keeps the room temperature at a
comfortable level by controlling the temperature and the fan speed automatically.
Australia_AQV24&30T@_IB&IM_EN_03562A(1).indd 21
Press the Auto Clean button.
When the air conditioner is turned off,
The Auto clean indicator on the indoor unit display appears and the Auto clean function

runs.
When the air conditioner is turned on,
After stopping the air conditioner operation , the Auto clean indicator on the indoor

unit display appears and the Auto clean function runs.
※ Auto Clean time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat), Heat, Fan mode : approximately 15 minutes.
Cancel Press the Auto clean button once again.
• When the air conditioner is turned on, the Auto clean function runs after
stopping the air conditioner operation.
Press the d'light Cool button on the remote controller while the air conditioner is
operating in Cool mode.
d 'light Cool indicator and air swing indicator appears automatically on the remote

controller display.
T he air conditioner will set the fan speed to auto and adjust the temperature

automatically according to the room temperature and humidity.
Cancel Press the d'light Cool button once again.
• d'light Cool function is only available in Cool mode.
• When d'light Cool function is activated, temperature sets automatically and
will appear on the remote controller display.
• If you press the Mode button while the d'light Cool function is on, it will cancel
the function.
• If using a multi system, this function will work only when the d'light Cool
function is set on all operated indoor units.
21
2013-01-07 오후 4:45:38