Table of Contents
Advertisement
Connect a CATV or AV input signal to the base station of the unit. .
Connect the power adapter. The power supply indicator of the signal turns green.
Push power switch button of the receiver of the unit to on.
lights saffron, next, the light turns green, it then enters the working status, the light turns
red.
When this happens, it will connect automatically.
Connecting......
Signal not found
Press ENT to rescan
Press ENT button to rescan the signal (Check whether the power switch button has
been pushed to "on" and the connection line has been connected correctly), the screen
will display:
Searching For Signals
Three screens should appear:
1. No signal is found:
No Signal Found
Press ENT to Rescan
Press ENT to rescan signal.
Using the Wireless
System
The
power supply indicator
X%
- 16 -
Advertisement
Table of Contents
