Performing The Initial Power-On Settings; Tv Controls - Polaroid TLU-44243B User Manual

6

Performing the initial power-on settings

6.1-TV controls

6.1.1-Temporary on/off (STAND-BY)
When you press the red STAND-
BY button located on the upper left
hand side of your remote control
while your television is switched
on, the sound and the picture will
go off. In the stand-by mode, the
power indicator of your television
will glow brighter. To switch your
television back on, either press any
numeric button or PR+/PR- buttons.
Caution! If you are not going to use your
television for a long time, unplug its power
cable from the socket.
6.1.2-Channel Selection
You may enter whichever program
number you would like by pressing
the PR+/PR- buttons located on
your television and your remote
control. To select the programs
that are above 9, you can use
the Numerical buttons. You may
enter the number of the program
you would like to select using the
numerical buttons. For example,
to switch to the program number
12, press respectively the numeric
buttons 1 and 2 on your remote
control. You can perform the
program selection also from the Program
Table. (See page 11)
6.1.3-Digital TV, Analog TV and AV
Mode Selection
Press the AV button on your
remote control. SOURCE menu
will be displayed. Select DIGITAL
TV (DTV), ANALOG TV (ATV) or
desired AV mode from the Setup
menu with Up/Down movement
buttons and confirm with OK button
so that your television will switch to
the source you have selected.
6.1.4-Performing the Volume setting
You can adjust the volume of your
television by using the VOL+/VOL-
buttons on your remote control.
6.1.5-Temporary sound mute (MUTE)
To temporarily mute the sound of
your television, press the MUTE
button on your remote control. In
that case, MUTE symbol will appear
on the screen. When you press the
same button a second time, the
sound will be restored. If you press the VOL+
button while in the Mute mode, the sound
level is increased and the Mute function is
aborted.
6.1.6-Returning to Selected Program
(SWAP)
Allows you to switch between the
current program you watch and the
last selected program. For example,
if you change the channel to Program
11 while you were watching Program
1, press SWAP button to switch back to
Program 1. Press SWAP button to switch
back to Program 11 again.
PR 01
6.1.7-Main Menu
Press the MENU button. The Menu
including all the setting menus will
appear on the screen. Navigate
through the Menu titles with the Up/
Down movement buttons and press
the OK button to select the desired
menu. If you want to exit the menu
in any step, just press the EXIT button. Press
BACK or MENU buttons to return to the
previous Menu while you are in a sub menu.
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
9 I
GB
PR 11
PR 01
MENU
SELECT
EXIT