Table of Contents
Advertisement
Mode
TFTP Server Address
HTTP Server Address
HTTP File Path
FTP Server Address
FTP Username
FTP Password
FTP Path
Check new firmware
Scheduling Day
Scheduling Time
Automatic Update
File Prefix
Next update time
There are TFTP / FTP and HTTP three ways to provide the auto
upgrade function.
Input the TFTP Server address, and it could input the IP or
Domain Name form.
Input the HTTP Server address, and it could input the IP or
Domain Name form.
Set up the file path.
Input the FTP Server address, and it could input the IP or
Domain Name form.
The login username.
The login password
Set up the file path.
The ATA will according to the below ways to check the new
firmware.
- Power On: The machine will check the new firmware
when power on and following the scheduling date and
time.
- Scheduling: The machine will follow the scheduling date
and time to check the new firmware.
The ATA will check the new firmware every the interval time. The
range is 1~30 days.
The ATA will check the new firmware between the time range by
random.
There are Notify only and Automatic ways to update.
- Notify only: If there are new firmware, the ATA will send
the "Be Be Be" sounds when pick up the handset to
prompt there are new firmware.
- Automatic: The ATA will carry firmware update out
automatically.
It will check the information of model name.
It will show the next check date and time.
- 34 -
Advertisement
Table of Contents
