Table of Contents
Advertisement
#113xxx*xxx*xxx*
xxx#
#114xxx*xxx*xxx*
xxx#
#115xxx*xxx*xxx*
xxx#
#190#
#195#
#198#
Following keypad commands can be used to display the network settings enabled on ATA via voice
prompt.
IVR Menu Choice
#120#
#121#
#122#
#123#
#124#
#125#
#128#
Set Network Mask
Set Gateway IP Address
Set Primary DNS Server
Unlock
Save Network Settings
Factory Reset
Machine operation
Check IP Address
Check network connection Type
Check the Phone Number
Check Network Mask
Check Gateway IP Address
Check DNS Server Setting
Check Firmware Version
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
None
None
None
IVR will announce the current IP address of
the ATA.
IVR will announce if DHCP in enabled or
disabled.
IVR will announce current enabled VoIP
number.
IVR will announce the current network mask
of the ATA.
IVR will announce the current gateway IP
address of the ATA.
IVR will announce the current setting in the
DNS field.
IVR will announce the version of the
firmware running on the ATA.
- 12 -
Static IP type.
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
Must unlock the protect
function before carry out
the firmware update
(#160#).
Must save network
settings after set up
network settings via
keypad.
The system will be reset to
factory default value and
reboot automatically.
Notes
Advertisement
Table of Contents
