Connection Type Description – PPPoE
PPPoE
User Name
Password
Service Name
Connection Type
Set LAN interface as PPPoE mode.
Set user name of PPPoE connection
Default : Null
Set password of PPPoE connection
Default : Null
Set Service Name of PPPoE for description
Default : Null
Set PPPoE connection type to be Continuous/ Connect on
Demand/ Manual. If user set type as Continuous, ATA will keep
trying to connect to server when PPPoE disconnect. If user set
type as Connect on Demand, please set following idle time, ATA
will check connection after this time. If user set type as Manual,
ATA will only connect or disconnect by press Connect or
Disconnect manually.
Default : Continuous
- 18 -