Panasonic Viera TX-L32ET5B Operating Instructions Manual page 73

2
Select [Wireless Network Settings]
Connection Test
Network Connection Wireless
Wireless Network Settings Access
IP/DNS Settings
Network Link Settings
Software Update
New Software Message On
Network Status
3
Select your desired access point
Available Wireless Networks
No. Network Name(SSID) Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
●
To search access points again
(blue)
4
Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:-
Network Name(SSID) : Access Point A
Security type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
5
Enter the encryption key of the access point
Wireless Network Settings
Encryption key
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _ @ /
, ; = $ [ ] ~ < > { } | ` ^
6
Select [Connection Test] and access to test
Connection Test Access
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
■
[WPS(PIN)]
Enter the PIN code to the access point, and then select [Connect]
WPS(PIN)
Please register the following PIN codes on the
wireless access point.
PIN code : 12345678
Select 'Connect' after entering and saving the
settings on the wireless access point.
Connect
select
access
● When the access point is already set, [Current Settings] screen will be
displayed.
To change the settings, select [No] on this screen and go to the next step.
select
Status
access
: Encrypted access point
●
For the information of the
highlighted access point
● If the selected access point is not encrypted, the confirmation screen will be
displayed. It is recommended to select the encrypted access point.
Set characters
select
7 8 9 ! : #
set
o p q r s t
" ' % & ?
●
You can set characters by using numeric buttons.
\
● After settings, return to the previous menu.
1 2 3
.!:# abc def
4 5 6
ghi jkl mno
7 8 9
pqrs tuv wxyz
0
select
access
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then try again.
If you continue to have difficulty, please contact your internet service provider.
●
For [WPS(Push button)] (p. 17)
(red)
●
For [WPS(PIN)] (see below)
(green)
●
To set manually (p. 74)
(yellow)
Store
●
Performs automatic testing of the network
connection for the TV. (It takes a while to
test.)
73