Panasonic Viera TX-L32ET5B Operating Instructions Manual page 40

Menu Item
Voice Guidance
Speed
Volume
User Level
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
Connection Test,
Network Connection,
Wireless Network
Settings,
IP/DNS Settings
Network Link Settings
Software Update
New Software Message
Network Status
Timer Programming
Off Timer
Auto Standby
40
Adjustments / Configurations (alternatives)
Set to [On] to enable voice guidance of the basic features (EPG, on-screen
messages, etc.) for visually impaired users [Off] / [On]
Selects the readout speed for the voice guidance [Normal] / [Fast]
Selects the volume for the voice guidance [Min] / [Mid] / [Max]
Selects the level of verbosity for voice guidance [Beginner] / [Expert]
Narration settings for visually impaired users [Off] / [Auto]
Set to [Auto] to activate the narration sound track when available on the
broadcast.
●
The availability of audio description sound track is indicated by [AD] in the
information banner (p. 21).
● For DVB mode
Adjusts the volume for Audio Description
●
For DVB mode
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
●
For DVB mode
Set to [On] to activate the description sound track from headphones [Off] / [On]
●
For DVB mode
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Sets the network setting to use in your network environment (p. 71)
Sets to control the TV with the devices connected to the network (p. 71)
Checks for available software updates from the Panasonic website
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Displays the network status (MAC Address, current network settings, etc.)
Sets a timer to record or remind forthcoming programmes (p. 52)
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 22)
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
●
Starting Timer Programming automatically does not affect this function.
● Automatic input switching with the connected equipment affects this function
and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby mode.