Input Owner Id - Panasonic Viera TX-L32ET5B Operating Instructions Manual

Lcd television
Hide thumbs Also See for Viera TX-L32ET5B:
Table of Contents

Advertisement

4. After the access point setting is finished, perform the connection test
3
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
5. Go to the next step
(Press twice)
[WPS(Push button)]
1. Press the WPS button on the access point until the light flashes
2. Connect the TV with the access point
WPS(Push button)
1) Please press the 'WPS' button on the access
point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
3. After the access point setting is finished, perform the connection test
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
4. Go to the next step
(Press twice)

Input Owner ID

4
Owner ID
Please enter new PIN
PIN
Make a note of the PIN number in case you forget it. The PIN number cannot be reset.
You can input or change the Owner ID later.
To skip this step
This step will be skipped in the Auto Setup after [Shipping Condition] (p. 55) is performed.
Ensure that your access point supports WPS for this setup.
WPS: Wi-Fi Protected Setup™
If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
Please enter your own choice of PIN number, name, etc. to help the
police to crack crime.
*
* * *
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
To set manually, select [Manual] and set each item.
For details
(p. 72)
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
To set manually, select [Manual] and set each item.
For details
(p. 72)
"Owner ID" (p. 56)
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents