Setup The Network Connection - Panasonic Viera TX-L32ET5B Operating Instructions Manual

Setup the network connection

3
Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 19, 69).
●
Please note that this TV does not support wireless public access points.
●
Ensure the network connections (p. 14) and network environment are completed before starting setup.
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless
■
[Wired]
1. Select [Auto]
Acquire IP Address
Auto
select
access
2. Go to the next step
(Press twice)
■
[Wireless]
Access points found automatically are listed.
1. Select your desired access point
Available Wireless Networks
No. Network Name(SSID)
1 Access Point A
2 Access Point B
3 Access Point C
● To search access points again
(blue)
2. Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:-
Network Name(SSID) : Access Point A
Security type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
3. Enter the encryption key of the access point
Wireless Network Settings
Encryption key
A B C D E F G H
U V W X Y Z
a b c d e f
u v w x y z
, ; = $ [ ]
16
Set later
Manual
Automatically setup is done and the test of the
network connection starts.
● To set manually, select [Manual] and set each item.
For details
Wireless type Status
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
g h i j k l m n o p q r s t
( ) + - . * _ @ / " ' % & ?
~ < > { } | ` ^ \
1 2 3
.!:# abc def
4 5 6
ghi jkl mno
7 8 9
pqrs tuv wxyz
0
[Wired] "Wired connection" (p. 14)
[Wireless] "Wireless connection" (p. 14)
select
access
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
(p. 72)
select
access
: Encrypted access point
● For the information of the highlighted
access point
● If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
Set characters
select
set
●
You can set characters by using numeric
buttons.
● To setup later on or skip this step
Select [Set later] or
: succeeded
The test is successful
and the TV is
connected to the
network.
: failed
Check the settings and
connections. And then
select [Retry].
●
For [WPS(Push button)] (p. 17)
(red)
● To set manually (p. 74)
(yellow)
Store