Table of Contents
Advertisement
TG6481FX(e)_QG.fm Page 7 Friday, June 5, 2009 4:49 PM
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, re-register the handset.
Handset
1
K (middle soft key)
2
{V}/{^}: "Handset Setup" i M
3
{V}/{^}: "Register H.set" i M
Base unit
Press and hold {x} for about 5 seconds, until
the registration tone sounds.
L The next step must be completed within
90 seconds.
Handset
Wait until "Enter Base PIN" is displayed. i
Enter the base unit PIN (default: "0000"). i
M
L When the handset has been registered
successfully, w stops flashing.
– 7 –
M
{x}
M
Advertisement
Table of Contents
