Table of Contents
Advertisement
TG6481FX(e)_QG.fm Page 6 Friday, June 5, 2009 4:49 PM
Frequently asked questions
Question
What should I do to display
caller information?
What should I do when noise
is heard, sound cuts in and
out?
What should I do when the
operating time seems to be
shorter even after I fully
charged the batteries?
What do I need to do to
erase y (Missed call) from
the display?
Cause/solution
L You must subscribe to a Caller ID service. Contact
your service provider/telephone company for
details.
L The message "You must first subscribe
to Caller ID." will be displayed until you
receive caller information after subscribing to a
Caller ID service.
L You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L Clean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
L There are unviewed missed calls remaining. View
them and erase y in the following way.
1
K (middle soft key)
2
{V}/{^}: "Caller List" i M
3
Press {V} to search from the most recent call, or
press {^} to search from the oldest call.
– 6 –
Advertisement
Table of Contents
