Removal Of The Engine From The Vehicle - PIAGGIO MSS X9 EVOLUTION 250 Workshop Manual

Engine from vehicle

Removal of the engine from the vehicle

- Remove the saddle and the side covers,
- Drain engine oil and coolant,
- Disconnect the battery,
- Remove the muffler assembly,
- Remove the rear wheel,
- Remove the throttle grip transmission,
- Disconnect the electrical devices,
- Disconnect the hoses (petrol-oil-vacuum-operated cock control).
WARNING
Wear safety goggles when using hitting tools.
WARNING
BE VERY CAREFUL WHEN HANDLING FUEL.
CAUTION
WHEN INSTALLING THE BATTERY, ATTACH THE POSITIVE LEAD FIRST AND THEN THE NEG-
ATIVE LEAD.
Silencer fixing
Please take note that, starting from chassis serial number ZAPM2300004503144, the three M8 x 50
silencer bracket fixing screws have been replaced by three M8 x 60 flanged head screws in order to
strengthen this fixing.
- Remove the nut shown in the figure, then take
out the pin.
ENG VE - 78
MSS X9 Evolution 250