MSS X9 Evolution 250
This section è is devoted to the operations that can be carried out on the vehicle's bodywork.
Seat
- Raise the saddle
- Extract the coupling pin of the gas shock absorb-
er;
- Unscrew the 3 screws fixing the saddle plate to
the centre cover and remove the saddle.
Rear handlebar cover
- Unscrew the 3 fixing screws;
- Disconnect the electric connectors;
- Remove the rear handlebar cover.
Front handlebar cover
- Remove the brake and oil pump covers on the
handlebar cover;
- Unscrew the 2 lower screws of the handlebar
cover (one per side).
- Remove the front handlebar cover.
Chassis
CHAS - 205