Sending A Message; Receiving A Message - Panasonic KX-TG8070FX Operating Instructions Manual

TG8070-8090FX(e-e).book Page 21 Wednesday, August 1, 2007 9:26 AM

Sending a message

Writing and sending a new message
1
{MENU} (right soft key) i h i {OK}
2
{^}/{V}: "Create" i {OK}
L You can use the same text you created last
time if you were interrupted (by an incoming
call or pressing {i}) and could not
send/save the message.
3
Enter the message (page 30). i {OK}
L While entering messages, the remaining
number of characters that can be entered is
displayed on the bottom of the handset
display.
4
Enter the destination phone number (20 digits
max.). i {OK}
■ Using the redial list:
{MENU} i {^}/{V}: "Redial" i {OK}
i {^}/{V}: Select the phone number. i
{OK} 2 times
■ Using the caller list:
{MENU} i {^}/{V}: "Caller List" i
{OK} i {^}/{V}: Select the party. i
{OK} 2 times
■ Using the handset phonebook:
{MENU} i {^}/{V}: "Phonebook" i
{OK} i {^}/{V}: Select the handset
phonebook entry. i {OK} 2 times
5
{^}/{V}: "Send" i {OK}
L To save the message, select "Save".
L To cancel sending, press {i}.
Note:
L This unit supports SMS messages of up to 160
characters, however, the maximum number of
characters you can send or receive may be
limited by your SMS service provider/telephone
company. Consult your SMS service
provider/telephone company for details.
L Successfully sent messages are not stored.
L Saved/failed messages are stored in
"Outgoing".
L If SMS message memory becomes full, you
cannot send/save any messages.
Sending a saved/failed message
1
{MENU} (right soft key) i h i {OK}
SMS (Short Message Service)
h
2
{^}/{V}: "Outgoing" i {OK}
3
{^}/{V}: Select a message. i {READ}
4
To send the message, press {MENU}. i
{^}/{V}: "Send" i {OK}
Editing and sending a saved/failed
message
1
{MENU} (right soft key) i h i {OK}
2
{^}/{V}: "Outgoing" i {OK}
3
{^}/{V}: Select a message. i {READ}
4
{MENU} i {^}/{V}: "Edit" i {OK}
5
Edit the message (page 30). i {OK}
6
Edit the destination phone number (20 digits
max.). i {OK}
7
{^}/{V}: "Send" i {OK}
Erasing saved/failed messages
1
{MENU} (right soft key) i h i {OK}
2
{^}/{V}: "Outgoing" i {OK}
3
{^}/{V}: Select a message. i {READ}
4
{MENU} i {^}/{V}: "Erase" or "Erase
All" i {OK}
5
{YES} i {i}

Receiving a message

L When an SMS message is received:
– a tone is heard (if the SMS alert is turned on)
– "New SMS" is displayed
– h is displayed
L If you receive messages which contain over 160
characters, they are divided into multiple
messages, each containing a maximum of 153
characters.
Reading a received message
1
{MENU} (right soft key) i h i {OK}
2
{^}/{V}: "Incoming" i {OK}
3
{^}/{V}: Select a message.
4
Press {READ} to read the message content.
21